| |
Exhaust Systems
Click on the images for a larger version
Robert Pulleyblank
John Bourke
Curtis Jacobson
To make a simple, clean dual exhaust system, we welded tubular
pass-thrus in the frame outrunners that are located just forward of the seats.
We fabricated a new seat mounting system that also provides pocketed locations
for the mufflers. The pipes stop just forward of the rear wheel arches. |
Mike Cook
The twin pipe system I made myself, it has an "H" crossover
pipe in the system. Note the "caps" I had to make these also as I was unable
to get hold of manufactured ones or those from a Midget.
|
Index
Fitting a V8 engine into an MGB
This site forms part of MG -
The Classic Marque
Email:
webmaster@mg-cars.org.uk
|