| |
Nick Smallwood
"Looking for more rigidity in my GT body I came up with an easy modification
of welding another cross-member under the front of each floor plan parallel to the
existing one, connecting the sill section to the middle chassis rail. The cross-member
repair sections are available for a few pounds and require only shortening.
This area has always concerned since I saw a MGBV8 in which the drivers legs had
been crushed after a particularly bad accident. The only resistance to the sill entering
the foot well is the floor pan. This modification makes the foot-well a box, and has the
double effect of increasing body rigidly and increasing driver/passenger safety." |
Index
Fitting a V8 engine into an MGB
|