Le Mans Sprites - 1968 era
I have found a very limited source for 8 port heads which have been cast from the Sprite at Le Mans in 1968 as well as Sebring and others...
Some photos:
The only info that I have is as follows:
Yes I have a few of these heads left. They are set-up for the stock valve size and have 24 cc chambers. They do have enough meat in the deck to mill for compression. They come ported and polished for power. They require the use of a special cam. The valve sequence is different for the stock stuff. I do have cam blanks with rough ground lobes.($150.00) You can use stock type rockers and valves train components.
Not cheap, but very period.......
If you are interested then please get in touch
Some photos:
The only info that I have is as follows:
Yes I have a few of these heads left. They are set-up for the stock valve size and have 24 cc chambers. They do have enough meat in the deck to mill for compression. They come ported and polished for power. They require the use of a special cam. The valve sequence is different for the stock stuff. I do have cam blanks with rough ground lobes.($150.00) You can use stock type rockers and valves train components.
Not cheap, but very period.......
If you are interested then please get in touch
0 Comments :
Post a Comment
<< Home